Window sealing methods help you avoid wasting energy in the cold and hot seasons.
Sealing the windows has many advantages, which in addition to preventing energy wastage, prevents noise from entering the building and also prevents annoying environmental noises from entering the building.
Aluminum and uPVC windows are the most used in buildings today. These windows have proper insulation on their own, but for their more appropriate and better insulation, it is necessary to use door and window sealing methods.
During the installation and commissioning of various types of aluminum windows, small holes may appear between the wall and the window frame, and sealants should be used to insulate and cover these holes so that the seams and holes next to the window are well covered by sealants. .
In some cases, if uPVC and aluminum doors and windows are not sealed well, pollutants and airborne particles can easily enter the house and can cause breathing problems for the people in the house.
If you entrust the construction of your aluminum window to a reliable company, you will no longer have to worry about the sealing of your window because reliable companies consider the customer’s concern as their concern and try to solve it.
Therefore, it is better to buy aluminum windows from a reputable company like Mehiya Panghre, which provides the best and highest quality doors and windows to the customer.
Double-glazed window sealing
One of the concerns of all people is the sealing of double-glazed windows, because by sealing them, additional costs can be reduced to a great extent. By using double-glazed window and door sealing methods, you can help control the proper temperature of the building and keep the temperature of the building at a normal level without incurring additional costs.
Insulation of sound, heat, cold and dust is done with double-paned door and window sealing methods, which can be used with different sealing methods to benefit from complete and appropriate insulation of doors and windows. In some cases, the improper installation of windows by ordinary people and non-experts causes the insulation of the window to not be done well, so there should be enough precision in choosing a specialist and door and window installer, such as choosing the type of door and window.
Types of double-glazed window sealing
There are many different methods for sealing aluminum and UPVC double-glazed windows, each of which can be considered for single-window, double-window, French, guillotine, etc. You will see the types of sealing methods below.
1- Window sealing with foam
Foam can be used to seal all types of old windows, and foam is considered the best and most appropriate method of insulating old windows. The possibility of covering with foam is higher than other methods, which can be used to cover the seams in old doors and windows forever and permanently.
The foam sealing method is used to prevent energy wastage and to prevent dust from entering the building. The compression in the tissue of this type of sealant has caused its extraordinary performance. Of course, you can use this method in new windows as well.
2- Special sealants for windows
Another suitable method to insulate aluminum and uPVC double-glazed doors and windows is to use special sealing glue. Using this good method, it is possible to cover the smallest seam and gap on the surface of the window.
In some insulation methods, sealing is not done well and sealing is beyond the scope of adhesive tape and similar methods. If there is this problem, special sealing glue can be used to see the best results.
Aquarium glue can also be used to insulate double- and triple-glazed doors and windows. An important point before gluing aluminum and UPVC windows is that the desired surface should be cleaned well so that the surface is free of dust so that the glue sticks well.
3- Use of wooden windbreak shutter
Another way to insulate doors and windows is to use wooden shutters, which are naturally more expensive than other sealing methods, but have a great effect in blocking wind and preventing cold air. The effectiveness of wooden shutters is suitable for insulation and prevents energy wastage.
This method is used after installing modern and new windows to add beauty to your building.
4- Use of honeycomb curtains
Honeycomb curtain is another window insulation method that strongly prevents energy loss. In addition, the very attractive and beautiful appearance of honeycomb curtain has made it widely used in buildings.
This curtain is also used to prevent the sunlight from entering the building, which is also used to seal the window and prevent the cold from entering. Honeycomb curtains also have a wide variety of colors and are produced as two layers, three layers and multiple layers.
5- Window sealing tape
Window sealing tape is another method of insulating aluminum doors and windows, which includes several methods. In the following, we will mention the types of methods.
- Felt: Felt is used to cover the window seam, which is cheap and easy to install for the window. It should be noted that if the window is exposed to moisture and rain, you should not use felt.
- Foam tape: Foam tape is used between the seams and frames of double-glazed windows and doors, and it is very convenient and useful.
Important tips for sealing windows
If we want to seal the windows well and carefully, we must follow important points about it. In the following, you will get to know some important points of window sealing.
- It is better to use flexible sealants so that their shrinkage is less. Less shrinkage in these products makes the life of the sealant longer and its initial form does not change.
- To apply the caulk, do this slowly and carefully to apply the caulk to the window in a straight line.
- You can use sealant tools to stick it, and one of the important tools for sticking the sealant is the use of sealant pipes, which can be used to perform insulation with precision.
- If your window is exposed to a lot of sight, you can use your finger or a tool to stick the sealant in a smooth line for one-handed and precise application of the sealant.
- Along with the sealant, you can use suitable curtain covers to ensure the best sound, heat and cold insulation.
- Using special insulation rubbers along with sealants can improve sealing to the highest level.
Aluminum door and window regulation is another insulation method that has a significant effect in preventing energy wastage and cold entering the building.